40A Current Booster For Potentiostat CS2040B High Current Potentiostat

CS2040B Current Booster

Single-channel potentiostat (CS350M/ CS310M/ CS300M etc) can achieve maximum±2A/10V output when it’s used alone. This value is ±1A/10V for each channel of bipotentiostat (CS2350M/CS2150M) and multichannel potentiostat (CS310X).

A current booster CS2040B can be connected to single-, bi-, or multi-channel potentiostat to boost the current up to 40A. Please note that one set booster can boost only one channel of bi- / multi-channel potentiostat.

When not connected the booster, the potentiostat can also be used alone.

CS2040B current booster +single channel potentiostat (such as CS350M)

EIS results of CATL-LAE895 battery core

Experiments results of potentiostat + CS2040B 40A booster

1. EIS Test of large capacity power batteries

Results

2. PEM water splitting

Results

Key specifications (when combination of CS2040B+potentiostat)

Potential range: ±5V(CS2040B)

Current range: 40A(CS2040B)

Current range: 40A fixed range

Compliance voltage: ±13V

EIS Frequency range: =50KHz

Communication: RS485

Techniques (when combination of Booster+potentiostat)

Stable polarization

• Open Circuit Potential (OCP)

• Potentiostatic (I-T curve)

• Galvanostatic

• Potentiodynamic (Tafel plot)

• Galvanodynamic (DGP)

Transient Polarization

• Multi Potential Steps

• Multi Current Steps

• Potential Stair-Step (VSTEP)

• Galvanic Stair-Step (ISTEP)

Chrono Method

• Chronopotentiometry (CP)

• Chronoamperametry (CA)

• Chronocaulometry (CC)

Voltammetry

• Linear Sweep Voltammetry (LSV)

• Cyclic Voltammetry (CV)

Electrochemical Impedance Spectroscopy (EIS)

• EIS vs Frequency (IMP)

• EIS vs Time (IMPT)

• EIS vs Potential (IMPE)(Mott-Schottky)

Battery test

• Battery Charge and Discharge

• Galvanostatic Charge and Discharge (GCD)

• Potentiostatic Charging and Discharging(PCD)

• Potentiostatic Intermittent Titration Technique(PITT)

• Galvanostatic Intermittent Titration Technique(GITT)

Corrosion Measurements

• Cyclic polarization curve (CPP)

• Linear polarization curve (LPR)

• Electrochemical Potentiokinetic Reactivation (EPR)

• Electrochemical Noise (EN)

• Zero resistance Ammeter (ZRA)

Standard supply for CS2040B booster

- CS2040B current booster instrument*1 set

- Power cable *1 pcs

- DB9 serial port connection cable *2 pcs (1 for replacement in the future in case it’s broken)

- DB15 connection cable*2 pcs (1 for replacement)

- Potential sampling cable*2 pcs (1 for replacement)

- CS2040B Specialized electrode cable (alligator electrode cable*2 and copper terminal electrode cable*2, 1 pcs each for replacement)

- High power dummy cell *1

After-sales Service

1.Warranty period: 5 years. During this period, all service including repair is TOTALLY FREE. 2. Provide installation guidance and manual.

3. Lifetime free software upgrading (of the same model) and technical service

    CorrTest Instruments Co. (China) manufactured her first full-digital potentiostat/galvanostat for corrosion electrochemistry in 1995. After 29 years of research and development, CorrTest has developed a series of electrochemical workstations dedicated to electroanalysis, corrosion, electrocatalysis, energy material research, sensors, electrodeposition etc. CorrTest has registered CorrTest^® trademark and acquired a number of patents, software copyrights.

    CorrTest has also developed different kinds of corrosion sensors and meters, corrosion management networks for on-site corrosion monitoring and risk evaluation of oilfields, petrochemicals, construction and offshore wind farms.

    “Quality from Technology", "Progess from Profession" is our motto for research and development. CorrTest will continue to provide customers with high-quality products and professional services.

1995：1^st electrochemical potentiostat was made based on AD&DA multifunction board

2007：CorrTest was officially established with 1^st generation CS350 potentiostat designed

2015：2^nd generation CS350G potentiostat with the achievement of 1MHz impedance

2016：Listed on China’s New OTC market and embarked on 1^st generation corrosion meters

2017：3^rd generation CS350H potentiostat, specializing in EIS for high-impedance coating

2021：4^th generation, CS350M and CS310X multichannel products

2023：5^th generation, CS2020B high-power booster to enhance CS350M output current